Course ID: 66774
Duration: 12 months
Application Fee : R200.00 (non-refundable)

N.B Fees exclude Assessment fees

Category

Further  Education Training Certificate – Manufacturing and Engineering


Description

Engineering Fabrication: Manufacturing and Engineering
SAQA ID UNIT STANDARD TITLE LEVEL CREDITS
115101 Address workplace hazards and risks NQF Level 2 4
116520 Apply safety, health and environmental principles and procedures in a workplace NQF Level 2 2
14683 Apply work site practices NQF Level 2 5
116533 Demonstrate basic knowledge and understanding of emergency preparedness and response NQF Level 2 2
110205 Demonstrate knowledge of the Mine Health and Safety Act, regulations and definitions NQF Level 2 5
12466 Explain the individual’s role within business NQF Level 2 4
9678 Follow basic health and safety practices underground NQF Level 2 5
9268 Manage basic personal finance NQF Level 2 6
116235 Operate a pendant controlled overhead cran NQF Level 2 5
12484 Perform basic fire fighting NQF Level 2 4
12483 Perform basic first aid NQF Level 2 4
115547 Replace conveyor belt steel structures (stringers, cradles) NQF Level 2 3
14713 Use welding definitions and symbols NQF Level 2 5
243056 Weld carbon steel work pieces using the shielded metal arc welding process in all positions NQF Level 2 16
115093 Control workplace hazardous substances NQF Level 3 4
244339 Mark off and fabricate sections using the contour marker method NQF Level 3 9
243053 Weld carbon steel work pieces using the oxy-acetylene gas welding process in all positions NQF Level 3 10
10848 Replace liners in a transfer chute NQF Level 2 2
10768 Cut material by means of lancing NQF Level 2 3
10824 Bend a pipe by means of a hydraulic pipe bender NQF Level 2 2
10768 Cut material by means of lancing NQF Level 2 3
12482 Join metals using the resistance welding process NQF Level 2 4
115547 Replace conveyor belt steel structures (stringers, cradles) NQF Level 2 3
14713 Use welding definitions and symbols NQF Level 2 5
243056 Weld carbon steel work pieces using the shielded metal arc welding process in all positions NQF Level 2 16
243064 Weld carbon steel work pieces, using the gas metal arc welding process in all positions NQF Level 2 15
115093 Control workplace hazardous substances NQF Level 3 4
244339 Mark off and fabricate sections using the contour marker method NQF Level 3 9
243053 Weld carbon steel work pieces using the oxy-acetylene gas welding process in all positions NQF Level 2 10

Requirements

NQF Level 2 NC (V) Qualification

  • A Grade 9 Certificate; or
  • An Adult Education and Training (ABET) NQF Level 1 Certificate; or
  • A recognised equivalent qualification obtained at NQF Level 1; or
  • An approved bridging programme designed for the specific purpose of access to NQF Level 2 or
  • A Recognition of Prior Learning (RPL) assessment programme, which meets the basic requirements for access to NQF Level 2.

NQF Level 3 NC (V) Qualification

  • A National Certificate (Vocational) at NQF Level 2; or
  • A recognised equivalent qualification obtained at NQF Level 2; or
  • An approved bridging programme designed for the specific purpose of access to NQF Level 3; or
  • A Recognition of Prior Learning (RPL) assessment programme, which meets the basic requirements for access to NQF Level

NQF Level 4 NC (V) Qualification

  • An NQF Level 3 National Certificate (Vocational) indicating that the learner has met the minimum subject requirements at Level 3; or
  • An appropriate registered equivalent qualification obtained at NQF Level 3; or
  • A bridging programme designed for the specific purpose of access to NQF Level 4; or
  • A Recognition of Prior Learning (RPL) assessment for Grade 11 or 12 learners who meet the basic requirements for access to NQF Level 4, and for students not part of the South African school system.